What size plate compactor do i need?
When choosing the size of the plate compactor, we should consider two factors. The first is the size of the construction site. If the site area is large, we should choose the larger size of the plate compactor, if the site area is small, choosing the smaller size of the plate compactor is more convenient to operate.
How to use a plate compactor?
When using a compactor plate， we can operate it by following the steps below:
1. Before using vibratory plate compactors, we should check the machine first, including whether the engine oil is sufficient, whether the air filter is clean, and whether all the parts are in good condition.
2. Start the vibratory plate compactors, and let the machine be thoroughly heated before use.
3. Place the vibratory plate compactors on a flat surface and start the engine.
4. Drag the vibratory plate compactors back and forth over the area to be compacted.
5. Continue with the previous operation until all areas are compacted.
6. After compacting, shut down the engine and check the vibratory plate compactor.
How to deal with the situation when the plate compactor not moving forward？
All machines have a lifespan, and after a period of use, the performance of the plate press may not be as good as before, so sometimes the plate press may not move forward. When this happens, we can take the following measures to troubleshoot the fault.
1. Check engine oil levels. If the oil is insufficient, you can refill the oil.
2. Check the fuel. If the fuel is insufficient, you can replenish it.
3. Check the air filter. Clean or replace it promptly.
4. Check the tension of the belt. Belt tension can be adjusted.
5. Check the transmission chain. Lubricate or adjust if necessary.
6. Check the security function. Ensure that all security features are activated correctly.
